Author: gnadmin

General information of flexible rubber coupling

Flexible rubber coupling, is also called as flexible connection, Soft rubber connector, soft rubber joints, flexible rubber joints, flexible rubber joints , rubber shock absorbers. The flexible coupling is mainly composed of the inner and outer rubber layer, Kordeinlage (ply) and steel rings, they form tubular rubber, under high temperature and pressure, then after vulcanization molding and then combined with metal flange Lapped Joint sets together. It is widely used in fire, chemical, valves and other piping systems, noise from seismic effects, absorption displacement generated during the operation of the pipeline.

Application of flexible rubber coupling

Rubber flexible coupling is a kind of hollow rubber products used to connect steel pipes in mud system. It can also be used for pump connection, valves, and high vibrating pipes, and temperature great vary pipe.

It is a kind of pipe joint with highly flexible, high air tightness, chemical resistance and weather resistance. In oil and gas drilling field, it is widely used to connect tank pipelines, pumps and used between other kinds of steel pipes.

Features of flexible rubber coupling

1) It is with high density internal wall, can withstand high pressure, good elastic reshape performance.
2) Reduce vibration and noise. Light weight design , easy installation and maintenance .
3) The structure can reduce structure borne noise, absorption of vibration.

As the above features, flexible rubber coupling is widely used in mud solids control system, to connect pipes and connect pumps. And flexible rubber coupling is a wearing parts for solids control systems. It needs to be replaced occasionly to aovid aging.

Specially made high-capacity units for all drilling environments

gnsolidsamerica.com patterns, manufactures and operates a comprehensive line of advanced balanced-elliptical and linear-motion shakers for each onshore and offshore applications. Regardless of whether utilised as scalping, main or stand-alone units, our high-capacity USA shaker screen provide unmatched solids removal. All folks shakers can be found for sell or rental.

We pioneered the designing of shakers that occupy minimum rig area, but supply the muscle to care for large solids volume. In high ROP applications, our shakers maintain solids at bay, allowing your energetic drilling fluid to complete at peak efficiency.

In designing our suite of substantial performing shakers, we looked initially at back as they are going to be asked to accomplish. Because drill solids degrade quickly when 1st processed, it is actually crucial they speedily be eliminated from your circulating mud. And that is where the shaker screen comes in, going for a critical position since the 1st mechanism for solids removal. Failure to be solids from the active mud could suggest diminished ROP, equipment harm, non-productive time and higher prices. In developing our shale shaker technologies we thought of:

The shaker vibration pattern

Vibration dynamics, or G-force

Deck size and configuration

Shaker processing efficiency

Shaker screen characteristics

What resulted are a great deal of a great number of innovative, large performing and cost-effective shakers across industry.

gnsolids provide all solids control item. GN designed the first-class machine, definitely makes you brighten, believe us, click on this link to enter a new display platform.

General information about the mud pump
Due to the simple operation and reliability performance, mud pump is widely used in oil, gas and petrochemical industries. Mud pump can be used for all the main processes which are associated with pumping through pipelines of various liquids – oil, petroleum products, liquefied gases, water , mud , chemicals , etc.

Functions of mud pump for drilling rigs

Mud pumps are used to transfer mud to the drilling wells to cool down drilling bits and lubricated the drilling bits, especially for oil and gas drilling wells. It is usually used together with mud recycling system to pump the clean mud to drilling wells for drilling. Mud pumps transfer mud to the drilling well to cool down bits, takeout sands and shattered rocks.

Applications of mud pump for oil and gas drilling

During drilling oil and gas wells, mud pump have an exclusive usage. They are used to circulate water or mud in the borehole. In the oil rigs, mud pump can also used for extraction of oil from wells , water pumping and high-viscosity oil through pipelines , hydraulic fracturing , water injection . Since in oil industry no one area where mud pump would not be used, further to improving mud pump in technical and economic remains a major challenge of the oil industry. Saving power when working, make it high efficiency and complete installed capacity of hydraulic machines is considered as the most important tasks of the mud pump manufacturer.

HQJ series shale shaker suitable for oil and gas drilling fluids solids control system for drilling fluids treatment after separation shaker in the solid phase particles.

A group of mud cleaner and a set Desanding cyclone cyclone desilter combination on a shaker, drilling fluid through the addition of mud or grit removal cyclone cyclone separator, which overflow return mud circulation system the bottom stream is further processed by sieving shaker, when necessary, the mud cleaner with a pre-shaker.

Drilling mud cleaner compact structure, small footprint size, powerful, drilling mud Second, the ideal choice of three efficient solids control equipment cleaner.

GN solids control drilling Desanding production desilter modular mud cleaner, which includes desander, desilter, pressure gauges, cyclone underflow tank, shale shaker, stand and base. Characterized in that desander and mud is provided between the main inlet pipe and outlet pipe control valve with chute, chute shaker located on the base, equipped with automatic anti-cyclone sand plug device and the bottom orifice adjustment. Apply new compact structure, easy to use, easy to maintain, reliable, can quickly remove hazardous solid phase drilling fluid, improve drilling performance, high-pressure jet drilling of new technology to meet the requirements.

GN uses the most advanced drilling cleaner manufacturing processes to ensure that produce powerful, compact and easy to operate, easy to maintain drilling fluid cleaner.

1. The main structure of the upper and lower drilling two cleaner layout, cyclone desander, desilter arranged in the upper part, with a runner on base, arranged on a shale shaker chute so compact, small footprint area;

2 desander and desilter main intake pipe and the pipe is provided between the fluid control valve, you can always adjust Desander and quantity desilter work, simple operation, easy maintenance. so that it looks all new. To shop from gnsolidsamerica, visit here.

China top solids control manufacturer: GN Solids Control, exported a complete set 1200GPM mud recycling equipments to middle east market for HDD drilling rig.

The system is customized for the customer. To further reduce the total cost of the tank, GN company offered complete equipment, and offer customer tank design drawing free of charge, customer build mud tanks locally. They are happy with the solution and the system used very well now.

Equipment for the 1200GPM mud recycling system:

1) 3 each Shale Shaker GNZS579

2) 1 Mud Cleaner with 3 each 10’’ desander cone and underflow shale shaker model GNZS594 (Desander cones only )

3) Jet mud mixer

4) Agitators

5) Centrifugal pump feeding for the desander cone

6) Mud tanks 1 each. W 3000 mm, H 230omm, L 12000 mm

Customer want tank size is  W 3000 mm, H 2300mm, L 12000 mm with center Partition , the I section for 3 Shale shakers with 2 Agitators,  II section for Mud Cleaner with 2 Agitators and the jet Mud Mixer. Centrifugal Pump Model SB8x6-12J for mud transfer  from Shale Shakers Section to Desander cones.