Author: gnadmin

Speed of cutting waste screw conveyor should be average. Too fast, it will waste material or make waste treatment equipment like high G shaker, centrifuge,cutting dryer overload. If speed too slow, upstream equipment cannot get enough feeding.

GN cutting waste scew conveyor with average speed 50 or 60 rpm. GN can also make customised speed per user special requirements.

And length of screw conveyor transfer can vary from 12ft to 48ft max. GN have standard 12ft length for each section. Users easy to change length per different jotsit situation.

Drilling fluids mud agitator usually use small power motor less than 22kw (30hp). In this case, magnetic agitator usually used to control the mud agitator in drilling field. It is a kind of control panel.

Explosion proof mud agitator magnetic start mainly used for oil & gas drilling. 

Un-Explosion proof mud agitator magnetic starter mainly used for water well drilling , HDD or other no dig drilling. But mostly, GN engineer will recommend user all choose EX control panel for all drilling site application.
As the cost will not be much different, but lifetime 3 times different.

• Jet Mud Mixer Model Gnsl150-35 -Matching pump -SB6X5-13J OR 37KW -Capacity- 150m /h(792GPM) -Pressuure- 0.25 – 0.40 MPA -lnlet- 150mm
• -Nozzle- 40mm -Hopper dimension- 750x750mm -Burden Speed -80kg/min -Density -2.4g/cm -Viscosity- 120s-Dimension – 2200x1700x1200mm -Weight-1400/1380kg QTY = 1 No.
• The GN Jet Mud Mixer is for mixing of chemicals for drilling mud

In Oilfield GN mud tank system including following types

1)Skid Mounted mud tank
2) Trailer mounted mud tank
3) Hydraulic Jack Up mud tank

Mud Tank Types for the mud system:

1) Shale Shaker Tank
2) Mud Trip Tank
3) Active Mud Tank
4) Mud Mixing Tank
5) Mud Storage Tank
6) Suction mud tank

High G shale shaker and shale shaker both belongs to sieving equipment. They  do not have distinguish difference.

Shale shaker is mainly used for solids control, to seprate solids from drilling fluids. Followed shale shaker, usually desander or desilter.

High G shaker is one kind of shale shaker with a bigger G force. It is mainly used in waste mangement field, to further separate particles from drilling cuttings. High speed centrifuge usually followed high G shaker.