GN CBM Drilling Mud System

Automated agitator Control raises the standards for mud agitator efficiency GN is the first company that can automatically adjust mud agitators to changing drilling conditions. ASC is designed to optimise mud agitator operating efficiency and to remove personnel from the agitator house environment. The system monitors fluid levels within the header tank and each mud agitator. Using these levels, the system automatically controls the mudflow to each shaker and brings on or off line the optimum number of shakers for the volume of drilling mud being processed. The main advantages gained when utilising the ASC are that expensive whole mud losses over the shaker screens are prevented, screen life is maximised, personnel exposure to the hazardous environment within the shaker house is minimised and rig personnel are alerted regarding screen failures thus minimising solids re-entering the drilling mud. Difference between different companies producing mud agitator is large, so choose a good supplier is very important, GN is a good choice.

More mud agitators are brought online. The number of operating mud agitators should be decreased accordingly such that the fluid level is maintained at its optimum within each agitator. This will enable either finer screens to be fitted thus improving solids control and reducing drilling fluid dilution or the screens withing the non-running mud agitators need not be compromised. The mud agitator house can be an unpleasant working environment and can foster an aversion to adjusting the mud agitators for optimum performance. ASC makes these adjustments automatically, relieving operators from the tasks of manually monitoring and making adjustments when flow rates, viscosity,or the solids content of the drilling fluid changes. Efficient solids control is assured. Look at a company’s good or bad, the key is to look at its product quality assurance.

mud agitator of gnsolidsamerica.com is according to customer’s actual working condition requirement, and the special design of a kind of special equipment of coal mine. Mixing yellow mud is mainly used in coal mine industry, in order to provide has the spontaneous combustion tendency of coal mine with a certain concentration of yellow mud, prevention of coal combustion.

The equipment independent drive structure is used in mixing and walk each other; At the same time of mixing mud, can also be walking back and forth on the orbit; In 0 ° C to 40 ° C ambient temperatures can work continuously for a long time; Equipment in addition to the normal operation, but also can be operated by remote control. The machine has compact structure, reasonable design; Mixing range is big, strong ability, high efficiency; The advantages of convenient operation and maintenance. The coal industry is the fast and efficient pulping ideal equipment. If you want to know something that is fun and exciting, you need to check this out!

A customer contact GN with their inquire that, they want to carry out the reclamation (Treatment and disposal) of the drilling cutting waste which collected and storage in the lined pit by utilizing the routine process as well as this process shall be proceeded when the drilling operation is finalized and the rig moved to other location. Therefore, by researching and studying, they have find out new methodology of treatment and disposal these waste by new technology that was utilized in various global oil and gas industries, instead of the old treatment and disposal process.  

The customer would like to get and utilize this Drilling waste management unit for carrying out the treatment and disposal process of the collected drilling cutting waste in the lined pit. They want to know, if there is available alternative equipment (Unit) in our firm or if GN-Solid Control  Company can provide such equipment (Unit).

Yes, indeed, GN Solids Control cpmpany is the only 1 API manufacturer who is responsible for solids control system, as well as big bowl centrifuge, vertical cuttings dryer, screw conveyor, dewatering unit for drilling waste cuttings management. GN system is used used to recover oil and drilling fluids and reduce the cost.

GN hot sale unit for drilling cuttings waste management:

1-       Augers (or Conveyors): to convey cuttings from shakers and other solid control equipment to Cuttings Dryer.

2-      Cuttings Dryer: to remove excess mud from cuttings.

3-      Fixation Equipment: which is consist of a Mixer and cement Silo and related augers and containers.

4-      Flocculation unit: to flocculate waste water or dumped mud prior to centrifuge.

5-      GBD low speed centrifuge to finalize dewatering process.

If you need more information of GN drilling waste management system, contact GN group.

Drilling waste high G dryer shaker is a special kind of shale shaker. It utilizes high G force mainly used to treat drilling waste cuttings.
Why it is called high G dryer shaker, what is the difference of high G dryer shaker with solids control shale shaker?

Yes, indeed high G dryer shale shaker is a kind of shaker. The difference of high G dryer shale shaker and solids control shale shaker as below:
1) G force different: High G dryer shale shaker may utilize G force around 8.0G during separate the drilling waste cuttings, while solids control shale shaker utilize 6.5G ~ 7G during working. The design and application G force different.
2) Feed type different: High G dryer shaker, it is used to treat drilling cuttings from solids control screen panel (shale shaker, desander, desilter). The cuttings transferred through screw conveyor auger to the high G dryer shaker. In this case, dryer usually is with hopper feeder. While solids control shale shaker is usually with box feeder or weir feeder.
3) As the dryer shaker G force is bigger then solids control shale shaker, in request a strong design for the shaker deck.
In which conditions high G dryer shaker can be used?
1) It is specialized for water based mud drilling cuttings separation. Followed with a high speed centrifuge for LGS. to separate the fine solids.
2) It can be used for oil based mud drilling cuttings separation, as the alternative of vertical cuttings dryer (Vortex G). But is cannot separate oil based cuttings as dryer as vertical cuttings dryer.
How can customer get fast delivery in case urgent?
GN always have high G dryer shaker and solids control shaker in stock in China factory and Houston warehouse.  

The necessity of the drilling waste management  by biological treatment method In the process of oil exploration and production, waste liquid will produce a large number of Wells and drilling cuttings. Because the waste left in the well site storage tank, due to leakage and overflow, submerged killings, ecological environment caused serious pollution of groundwater, surface water surrounding. Is long-term environmental protection difficulty in oil field drilling waste, with countries to increasingly stringent environmental requirements, solve the problem of drilling waste pollution has become one of the important research subject of petroleum industry of environmental protection. 

Of drilling waste management  methods at home and abroad are mainly chemical flocculation, curing, washing, burning, drying and landfill etc as chemistry and physics to sichuan. After chemical flocculation treatment conforms to the requirements of environmental protection can be directly discharge, or loop is applied in compound mud, or into the well, but the lack of efficient economic flocculant; Chemical solidification method was cured of harmful substances not proliferation and migration, jean valjean asked environment but curing processing need certain cost, once and for all.

GN drilling waste management is really a proffessional producer with regard to shale shaker as well as maintain the shaker display manufacturing plant making understand shaker display much better trigger we’re produce shaker. want to know more about us Make sure you get in touch with GN Solids Manage readily.

gnsolidsamerica.com shale shaker is actually linear movement shale shaker retains regarding 80M3/h dealing with capability. This retains two shaker displays. The actual display region arrived at 1.8M2 or even 9.5ft2. GN may be used within function more than drilling rigs dirt program, short essential oil nicely drilling, for example ZJ20 rigs, in addition to 100t HARD DISK DRIVE dirt program.

GN Shale shaker is actually an additional linear movement shaker created by GN. This retains regarding 120M3/h dealing with capability. This retains two shaker displays.

The actual shaker display is actually 630x1250mm. It’s exact same along with NOVEMBER Brandt shaker display therefore it may be changed through NOVEMBER Brandt shaker display. Additionally it’s the fast alternative kind with regard to preserving enough time. GN Shale shaker generally utilized in ZJ30 dirt program, additionally 200t, 300t, 450t HARD DISK DRIVE dirt techniques.

GN shale shaker screen is quite well-liked shale shaker possibly because divided gear or even part of dirt program. 83-3 retains regarding 140M3/h dealing with capability.

And contains 3 shaker displays because 830x1080mmx3 the actual shaker display region is going to be two 7M2. The actual shaker displays tend to be exact same along with 83-2 Shale shaker them all could be changed through one another. And also the kinds could be gentle connect straps, PWP, as well as PMD kind.