Tag: Solids

GN will custom fabricates exclusive and specific equipment for the working web page. Not matter is V-bottom tank, circle tank and rectangle tank, or single shaker and double shaker. GN will deliver the best answer for your project.GN has worked around the solids handle and drilling waste management for many years. Wealthy encounter and well-trained staffs are devoted to offer you the advance equipment and method for you personally.

As a accountable enterprise, GN not merely focused on the drilling waste management but also concerns concerning the environment our planet. Thus, we put forward to solids manage program for the HDD and dredge slurry separation. Specifically for dredge slurry separation, our method removes undesirable stone, debris, sand and silt and recycles the water.

GN Solids America supply the from 150GPM to 3000GPM method for oil & gas drilling fluids, HDD, TBM,CBM and dredge method. The equipment is including shale shaker, desaner, desilter, centrifuge, mud tank, mud gas separator, vacuum degasser, centrifugal pump and vertical cutting dryer etc. The function is including recycle the fluids, re-clean the fluid, storage the drilling fluid, mixing the drilling fluids and slurry separation.

Click the following links to know drilling waste management.

Drilling waste management produced through GN Solids Manage

Drilling waste management applicable in oil and water well drilling mud circulation jobs

GN Solids Control is world famous manufacturer for mud recycling system for HDD, CBM, piling, underground instruction, trenchless, dredge slurry separation, etc…
GN Solids Control also offers customized solution per customer’s condition. A customer request 500GPM mud system for HDD rig. Below are their requirements on equipment for the 500GPM mud system. GN Solids Control gives solution relatively to optimize the mud system for HDD rig:
1) Customer request on 500GPM mud tank dimension: Mud tank to same as 20 ft standard O.T. container.( Standard frame with container corners for transport on containers vessels and for quick lifting)
GN Solution on the 500GPM mud system tank dimension: It is no problem for exactly same dimension with 20ft container. But GN recommends the tank with a smaller width: 2000mm in order to put into container for shipment.
2) Tank compartment for the 500GPM mud system: Divide the 20 ft mud tank to three chambers – (1) Shale shaker chamber, (2) De-sander chamber, (3) Desilter chamber
GN confirms the 3 chamber of the 500gpm mud tank system
3) Customer request to install bigger shale shaker model GNZS594E with 616 GPM.
GN team confirms the big shaker for 500GPM mud system.
4) Furthermore, customer request install 2 Nos. of big power pump 6×5 centrifugal pump with 45 Kw motor.

And install big capacity mud cleaner (shaker + 2 nos. of de-sander + 12 Nos. of desilter) model GNZJ594E-2S12N with 1056 GPM capacity.
Per the big centrifugal pump and big capacity mud cleaner, GN engineer give solution that: connection shale shaker with mud cleaner shaker with distribution box, controlled by valve, customer can choose to use 1 shaker or 2 shakers. In this case, the mud system can extend to be with 500GPM capacity or 1000GPM capacity.
During 500GPM capacity, the user blocks half of desander cone and half of desilter cone for a better hydraucyclone separation.
5) Regarding mixing system, as customer already have some mud tanks locally, GN offers a separate jet mud mixer for option. Customer can chose it to match with its local mud mixing tank. Or connect the shale shaker tank with its original mud tanks.
The system is easy to shift between 500gpm and 1000gpm capacity. Customer is very happy with professional engineering team of GN Solids Control.
If you have interest on above 500 / 1000 GPM HDD mud system, or you have any special request on no-dig compact mud recycling system, you can contact GN group freely for more information.

No effectively can be drilled without having the generation of wastes. The varieties of waste generated include drill cuttings, waste water, spent drilling ?uids,completion ?uids and ?ltration wastes. The contaminants around the wastedepend largely on the varieties of drilling?employed to drill the properly.

With escalating legislation, public awareness and minimum operatorenvironmental standards, the containment, handling and therapy ofdrilling waste has enhanced in importance and now ranks in importancealong side that of drilling ?uids in lots of countries worldwide.

The treatment processes utilised on the waste generated var y from countr y to countr y and extremely substantially rely around the neighborhood legislation. In countries where no legislation exists, several operators will fall back onminimum requirements made use of in other countries or standards set at a corporatelevel.

The Four R’s are a single of quite a few methods to describe the waste management
hierarchy strategy and are crucial when thinking of what our
drilling waste management solution line consist of. The 4 R’s are:Lower, Reuse, Recycle, Recover

The Drilling Waste Management item line is developed to assist maximise compliance using the waste management hierarchy principles,too as ensuring that nearby regulations and standards are compliedwith. In the end, disposal are going to be needed in all instances, be it solids and / orliquids.

GN Solids America-Drilling Waste Management Company

Gn Company Drilling as a result of Manufacturing

Drill pipe is an industrial tubular used to drill into the ground. There are three major industries that use drill pipe. The most common application of drill pipe is in the oil and gas drilling. Another industry that uses drill pipe is the underground construction industry, or more specifically, the Horizontal Directional Drilling (HDD) industry. And finally, the water well drilling industry also uses drill pipe.

The oil and gas industry is where drill pipe is used the most. Another industry that uses drill pipe is the underground construction industry, or more specifically, the Horizontal Directional Drilling (HDD) industry. This industry utilizes drill pipe to bore tunnels underneath waterways, major roadways, and generally any place where trenching is not acceptable. The resulting bore is used for various utility pipelines such as: fiber optic, water, electricity, and oil and gas. HDD drilling rigs are very different from oilfield drilling rigs in that they are almost completely laying flat or horizontal. Most of the larger (Maxi) HDD rigs use exactly the same drill pipe that the oilfield uses.

 

solids handle or mud cleaner system is indispensable inside the complete rig system. Why is it so very important? The solids handle method will be to get rid of or do away with drilled solids in conjunction with other undesired contaminates.
In summary, the causes to carry out away with drilled solids are very some:
1. To decreased wastes for environmental causes,
2. To save Mud cleaner price,
3. To save income on waste disposal price,
4. To stop blow outs,
5. To quit stuck pipe and,
6. To quit excessive location on on Mud cleaner.
The surface mud cleaner program may be a processing plant to prepare mud for retund towards the bottom inside the hole. Given that all wellbores are surely not the precise related, pretty exact similar scenarios will require far more rigid mud specifications than other individuals. The mud method is generally the crucial to drilling the least high priced footage. When the mud cleaner is improperly treated, troubles charges can sky rocket.
There are many sort of Mud cleaner, water primarily primarily based drilling Mud cleaner, oil based drilling Mud cleaner and so forth. Although there is certainly distinction among drilling Mud cleaner, however the requirement of removal of undesired drilling cuttings and solids particle or recover the precious drilling mud cleaner and drilling fluids agent is extremely of terrific significance towards the smooth mud circulation and advantageous drilling penetration.

For more Mud cleaner read below,pls click to know.

http://www.gnsolidsamerica.com/mud-cleaner.html

http://drillingmudcleaner.com/category/drilling-mud-cleaner/

http://www.drillmudsystem.com/search/Mud+cleaner

http://mudcleaner.wordpress.com/2014/05/22/drilling-mud-system-works-of-gn-company/