Tag: Solids

HQJ series shale shaker suitable for oil and gas drilling fluids solids control system for drilling fluids treatment after separation shaker in the solid phase particles.

A group of mud cleaner and a set Desanding cyclone cyclone desilter combination on a shaker, drilling fluid through the addition of mud or grit removal cyclone cyclone separator, which overflow return mud circulation system the bottom stream is further processed by sieving shaker, when necessary, the mud cleaner with a pre-shaker.

Drilling mud cleaner compact structure, small footprint size, powerful, drilling mud Second, the ideal choice of three efficient solids control equipment cleaner.

GN solids control drilling Desanding production desilter modular mud cleaner, which includes desander, desilter, pressure gauges, cyclone underflow tank, shale shaker, stand and base. Characterized in that desander and mud is provided between the main inlet pipe and outlet pipe control valve with chute, chute shaker located on the base, equipped with automatic anti-cyclone sand plug device and the bottom orifice adjustment. Apply new compact structure, easy to use, easy to maintain, reliable, can quickly remove hazardous solid phase drilling fluid, improve drilling performance, high-pressure jet drilling of new technology to meet the requirements.

GN uses the most advanced drilling cleaner manufacturing processes to ensure that produce powerful, compact and easy to operate, easy to maintain drilling fluid cleaner.

1. The main structure of the upper and lower drilling two cleaner layout, cyclone desander, desilter arranged in the upper part, with a runner on base, arranged on a shale shaker chute so compact, small footprint area;

2 desander and desilter main intake pipe and the pipe is provided between the fluid control valve, you can always adjust Desander and quantity desilter work, simple operation, easy maintenance. so that it looks all new. To shop from gnsolidsamerica, visit here.

China top solids control manufacturer: GN Solids Control, exported a complete set 1200GPM mud recycling equipments to middle east market for HDD drilling rig.

The system is customized for the customer. To further reduce the total cost of the tank, GN company offered complete equipment, and offer customer tank design drawing free of charge, customer build mud tanks locally. They are happy with the solution and the system used very well now.

Equipment for the 1200GPM mud recycling system:

1) 3 each Shale Shaker GNZS579

2) 1 Mud Cleaner with 3 each 10’’ desander cone and underflow shale shaker model GNZS594 (Desander cones only )

3) Jet mud mixer

4) Agitators

5) Centrifugal pump feeding for the desander cone

6) Mud tanks 1 each. W 3000 mm, H 230omm, L 12000 mm

Customer want tank size is  W 3000 mm, H 2300mm, L 12000 mm with center Partition , the I section for 3 Shale shakers with 2 Agitators,  II section for Mud Cleaner with 2 Agitators and the jet Mud Mixer. Centrifugal Pump Model SB8x6-12J for mud transfer  from Shale Shakers Section to Desander cones. 

Automated agitator Control raises the standards for mud agitator efficiency GN is the first company that can automatically adjust mud agitators to changing drilling conditions. ASC is designed to optimise mud agitator operating efficiency and to remove personnel from the agitator house environment. The system monitors fluid levels within the header tank and each mud agitator. Using these levels, the system automatically controls the mudflow to each shaker and brings on or off line the optimum number of shakers for the volume of drilling mud being processed. The main advantages gained when utilising the ASC are that expensive whole mud losses over the shaker screens are prevented, screen life is maximised, personnel exposure to the hazardous environment within the shaker house is minimised and rig personnel are alerted regarding screen failures thus minimising solids re-entering the drilling mud. Difference between different companies producing mud agitator is large, so choose a good supplier is very important, GN is a good choice.

More mud agitators are brought online. The number of operating mud agitators should be decreased accordingly such that the fluid level is maintained at its optimum within each agitator. This will enable either finer screens to be fitted thus improving solids control and reducing drilling fluid dilution or the screens withing the non-running mud agitators need not be compromised. The mud agitator house can be an unpleasant working environment and can foster an aversion to adjusting the mud agitators for optimum performance. ASC makes these adjustments automatically, relieving operators from the tasks of manually monitoring and making adjustments when flow rates, viscosity,or the solids content of the drilling fluid changes. Efficient solids control is assured. Look at a company’s good or bad, the key is to look at its product quality assurance.

mud agitator of gnsolidsamerica.com is according to customer’s actual working condition requirement, and the special design of a kind of special equipment of coal mine. Mixing yellow mud is mainly used in coal mine industry, in order to provide has the spontaneous combustion tendency of coal mine with a certain concentration of yellow mud, prevention of coal combustion.

The equipment independent drive structure is used in mixing and walk each other; At the same time of mixing mud, can also be walking back and forth on the orbit; In 0 ° C to 40 ° C ambient temperatures can work continuously for a long time; Equipment in addition to the normal operation, but also can be operated by remote control. The machine has compact structure, reasonable design; Mixing range is big, strong ability, high efficiency; The advantages of convenient operation and maintenance. The coal industry is the fast and efficient pulping ideal equipment. If you want to know something that is fun and exciting, you need to check this out!

A customer contact GN with their inquire that, they want to carry out the reclamation (Treatment and disposal) of the drilling cutting waste which collected and storage in the lined pit by utilizing the routine process as well as this process shall be proceeded when the drilling operation is finalized and the rig moved to other location. Therefore, by researching and studying, they have find out new methodology of treatment and disposal these waste by new technology that was utilized in various global oil and gas industries, instead of the old treatment and disposal process.  

The customer would like to get and utilize this Drilling waste management unit for carrying out the treatment and disposal process of the collected drilling cutting waste in the lined pit. They want to know, if there is available alternative equipment (Unit) in our firm or if GN-Solid Control  Company can provide such equipment (Unit).

Yes, indeed, GN Solids Control cpmpany is the only 1 API manufacturer who is responsible for solids control system, as well as big bowl centrifuge, vertical cuttings dryer, screw conveyor, dewatering unit for drilling waste cuttings management. GN system is used used to recover oil and drilling fluids and reduce the cost.

GN hot sale unit for drilling cuttings waste management:

1-       Augers (or Conveyors): to convey cuttings from shakers and other solid control equipment to Cuttings Dryer.

2-      Cuttings Dryer: to remove excess mud from cuttings.

3-      Fixation Equipment: which is consist of a Mixer and cement Silo and related augers and containers.

4-      Flocculation unit: to flocculate waste water or dumped mud prior to centrifuge.

5-      GBD low speed centrifuge to finalize dewatering process.

If you need more information of GN drilling waste management system, contact GN group.

Drilling waste high G dryer shaker is a special kind of shale shaker. It utilizes high G force mainly used to treat drilling waste cuttings.
Why it is called high G dryer shaker, what is the difference of high G dryer shaker with solids control shale shaker?

Yes, indeed high G dryer shale shaker is a kind of shaker. The difference of high G dryer shale shaker and solids control shale shaker as below:
1) G force different: High G dryer shale shaker may utilize G force around 8.0G during separate the drilling waste cuttings, while solids control shale shaker utilize 6.5G ~ 7G during working. The design and application G force different.
2) Feed type different: High G dryer shaker, it is used to treat drilling cuttings from solids control screen panel (shale shaker, desander, desilter). The cuttings transferred through screw conveyor auger to the high G dryer shaker. In this case, dryer usually is with hopper feeder. While solids control shale shaker is usually with box feeder or weir feeder.
3) As the dryer shaker G force is bigger then solids control shale shaker, in request a strong design for the shaker deck.
In which conditions high G dryer shaker can be used?
1) It is specialized for water based mud drilling cuttings separation. Followed with a high speed centrifuge for LGS. to separate the fine solids.
2) It can be used for oil based mud drilling cuttings separation, as the alternative of vertical cuttings dryer (Vortex G). But is cannot separate oil based cuttings as dryer as vertical cuttings dryer.
How can customer get fast delivery in case urgent?
GN always have high G dryer shaker and solids control shaker in stock in China factory and Houston warehouse.